So in the spirit of helping others, UCC and its other versions require installation
Be well, People
In my Case
- Update: Import TPC - Install TPC From Tools tab or Clicking the installer folder in the Project Overview- Integrations Associated - Behavior Designer - Movement - Death Match AI
- All my other assets just require Import and its usually done but for the all the searching I did Installing TPC
- His Documentation only states to import, this has not been the issue in my case.
"Ensure these four packages are imported before the Deathmatch AI Kit. If you forget to import one of these packages before importing the Deathmatch AI Kit there’s a chance that the behavior tree will be reserialized with a missing task reference. In this case you should reimport the Deathmatch AI Kit again. The Deathmatch AI Kit will not work with UFPS as the Deathmatch AI Kit uses melee weapons. UFPS can be upgraded to the First Person Controller for the price difference.
- Going to Check All warnings and Such and put them here.
I've reimported 15 or so times, in various forms. Until the UCC Intergration and Death Match AI no errors. But Formation and Tactical movement packs create a Grid Warning. I've followed what I found on here. I've seen the page you made and for the life of me I can'tn get it to work and with errors it won't compile. TPC hasn no warnings in Unity 2021.2.9f1. I tried this first in 2020.3 but, I have gone round and round with it and after 7-10 hrs I have no idea whats really wrong. Based on what I read the integration didn't work as DMAI says many things are missing. Lowest I got my errors down to was 198 or so.
I've tried doing the imports in several patterns, and even imported DMAI first to see what it does.
Read and Learned from this https://opsive.com/forum/index.php?threads/new-package-import-fails-with-multiple-errors.7130/
This https://opsive.com/support/documentation/deathmatch-ai-kit/
and a few other threads. Overall I'm a bit burnt out as I really don't know whats wrong.
Hopefully I'll get some pointers and it'll get fixed. But best of luck to anyone else using DMAI because man, it has been a pain in my butt.
Update : Through Deletion and Reimporting some Files the Errors went down to 6.
Editor Version 2019
2021 I did 10 or more tests
2020.3 6-7 or more trying to get it to work. The numbers are probably higher
2019 about 10 or more tests
TPC 2.4.5
DMAI 2.0.2
And the Rest are the currently highest available updated packages. Downloading the older isnn't possible as far as I know.
I'm a Modeler mainly(Self Taught mostly) and have been recovering from a head inuury for 7 ears now and it effects my learning speed and capacity. Haven't been able to learn unity's code as of yet but hope to. Would allow me to make new things and I wouldn't just be playing with the models I've made. Lot to learn but my main problem seems to be lack of insight within unity issues itself.
BD
BD Movement
TPC
Integrations CC Shared Source and UCC Integrations
DMAI
Only Assets in use are Opsive.
Errors are about 51 with only DMAI imported
Forwards or backwards from the Order above produces 221 errors
If CC shared source is installed after DMAI it goes down to 198 or 196 before it stays at 221
I really haven't counted the times I've tested this but onl once got the errors down to 6 didn't SS it but it had 2 things missing and was complaining about Ongui and a few other new errors.
All Opsive assets downloaded within the past 4 days or so
Be well, People
In my Case
- Update: Import TPC - Install TPC From Tools tab or Clicking the installer folder in the Project Overview- Integrations Associated - Behavior Designer - Movement - Death Match AI
- All my other assets just require Import and its usually done but for the all the searching I did Installing TPC
- His Documentation only states to import, this has not been the issue in my case.
"Ensure these four packages are imported before the Deathmatch AI Kit. If you forget to import one of these packages before importing the Deathmatch AI Kit there’s a chance that the behavior tree will be reserialized with a missing task reference. In this case you should reimport the Deathmatch AI Kit again. The Deathmatch AI Kit will not work with UFPS as the Deathmatch AI Kit uses melee weapons. UFPS can be upgraded to the First Person Controller for the price difference.
Deathmatch AI Kit - Opsive
Before getting started, the Deathmatch AI Kit requires the following assets: Behavior Designer Behavior Designer – Movement Pack Ultimate Character Controller, UFPS, or Third Person . . .
opsive.com
- Going to Check All warnings and Such and put them here.
I've reimported 15 or so times, in various forms. Until the UCC Intergration and Death Match AI no errors. But Formation and Tactical movement packs create a Grid Warning. I've followed what I found on here. I've seen the page you made and for the life of me I can'tn get it to work and with errors it won't compile. TPC hasn no warnings in Unity 2021.2.9f1. I tried this first in 2020.3 but, I have gone round and round with it and after 7-10 hrs I have no idea whats really wrong. Based on what I read the integration didn't work as DMAI says many things are missing. Lowest I got my errors down to was 198 or so.
I've tried doing the imports in several patterns, and even imported DMAI first to see what it does.
Read and Learned from this https://opsive.com/forum/index.php?threads/new-package-import-fails-with-multiple-errors.7130/
This https://opsive.com/support/documentation/deathmatch-ai-kit/
and a few other threads. Overall I'm a bit burnt out as I really don't know whats wrong.
Hopefully I'll get some pointers and it'll get fixed. But best of luck to anyone else using DMAI because man, it has been a pain in my butt.
Update : Through Deletion and Reimporting some Files the Errors went down to 6.
Editor Version 2019
2021 I did 10 or more tests
2020.3 6-7 or more trying to get it to work. The numbers are probably higher
2019 about 10 or more tests
TPC 2.4.5
DMAI 2.0.2
And the Rest are the currently highest available updated packages. Downloading the older isnn't possible as far as I know.
I'm a Modeler mainly(Self Taught mostly) and have been recovering from a head inuury for 7 ears now and it effects my learning speed and capacity. Haven't been able to learn unity's code as of yet but hope to. Would allow me to make new things and I wouldn't just be playing with the models I've made. Lot to learn but my main problem seems to be lack of insight within unity issues itself.
BD
BD Movement
TPC
Integrations CC Shared Source and UCC Integrations
DMAI
Only Assets in use are Opsive.
Errors are about 51 with only DMAI imported
Forwards or backwards from the Order above produces 221 errors
If CC shared source is installed after DMAI it goes down to 198 or 196 before it stays at 221
I really haven't counted the times I've tested this but onl once got the errors down to 6 didn't SS it but it had 2 things missing and was complaining about Ongui and a few other new errors.
All Opsive assets downloaded within the past 4 days or so
Attachments
Last edited: